What threads are used to make flower balls? Balls of thread - a weightless miracle with your own hands (video)

Using threads and PVA glue, you can create inexpensive original decorations for your home, enliven the interior of an office, decorate a cafe, or make a store and beauty salon more comfortable.

Easy to make, these balls have an endless variety of solutions and give scope for creativity and imagination. How much joy this simple craft made by the whole family will bring!

Air balloons;
A skein of thread according to your taste and desire;
Vaseline or any cream;
PVA glue;
a little sugar;
Rubber gloves;
Brush.

Since inflatable balls serve as the basis for a future ball of thread, it is best to choose a higher quality option so that it does not burst during operation.

Let's get started

Step 1

First of all, you need to inflate a balloon of the desired diameter. The size of the future ball depends on the space being decorated and the overall composition. First, let's practice on a ball of medium diameter, about 8-10 centimeters. Inflate the balloon and tie the hole tightly, leaving a fairly long end free.

Step 2

Carefully coat the entire surface of the balloon with Vaseline or cream. This is necessary so that the threads do not stick to the base ball, and we can easily remove it at the end of the work.

Step 3

The next step is preparing the glue. You need to take a flat, narrow bowl and dilute PVA glue with water in a ratio of 1:2. The total amount of glue that we will need during the work process cannot be determined in advance. This understanding will come with experience. For example, to start, take one tablespoon of glue and mix it with two tablespoons of water. For structural strength, you can add 2-3 teaspoons of sugar to the glue solution. In this case, it is better to take warm water.

Step 4

On a table previously covered with working oilcloth, place a container with prepared glue and place a skein of thread next to it. Pulling the thread through the glue, carefully wrap the moistened thread around the ball, smeared with Vaseline or cream. Lightly stretching the thread, we lay the turns on the ball in different directions. The density and direction of wrapping also depend on your desire and imagination.

Step 5

Balls wrapped in thread soaked in glue must be hung to dry. Try to find enough space so that the balls do not touch other objects or each other. It is not recommended to speed up the process using heating devices. Drying usually takes 1-2 days. Then we take the dried and hardened ball and carefully pierce the base ball with a needle. All that remains is to carefully pull out the deflated ball between the threads. A crochet hook can help with this.

Step 6

All that remains is to decorate it at your request with sparkles, beads, rhinestones, sequins, beautiful buttons, artificial flowers... What a huge scope for your taste and imagination! Handmade balls of thread and glue will enliven any interior and will delight others for a long time.

Reading time ≈ 6 minutes

Quite a popular product made from threads are coolies. They can be used as decor or decoration for the New Year tree. The photos used in the article will help you step by step to make a ball of thread with your own hands. Images will help determine the algorithm of actions. Study the details, see everything using a specific example. Balls are used as a basis if you need to create an original children's toy, some kind of designer item.

Necessary materials

Making a balloon is not as difficult as it might seem at first glance. It is necessary to prepare the following materials:

Threads - quality, color, thickness are selected at your own discretion.
A needle (preferably with a large diameter eye).
Glue - it is recommended to use standard PVA, since special ones are saturated with additives that can negatively affect the appearance of the balls.
Glue gun (optional).
Balloon.
Vaseline - used to easily separate the workpiece from the coolie.
Jewelry – here you can let your imagination run wild (beads, beads, rhinestones, designer ribbons).

Step-by-step instructions for making balls

The presented step-by-step instructions with photos will help you make balls of thread with your own hands. This master class is a visual aid on how to create a real masterpiece step by step.

Jewelry options

More than one idea comes to mind. If a person is creative, has a sense of style, and has the makings of a designer, then he will certainly come up with many interesting products.

Christmas tree

In anticipation of the holiday, families decorate their homes. The main thing is that the attributes correspond to the theme. To create the structure you will need: a branched part of a tree or bush, balls of thread, a garland. The branch is wrapped in a garland, and the coolies are hung on the branches. It looks simple, but tasteful.

New Year's garland

An equally interesting idea that can be implemented anywhere - a residential building, a work office, a children's play area, a catering establishment, a banquet hall. Purchase a regular garland with minimal LEDs. Light bulbs are inserted into balls of different diameters and colors (if desired, you can also choose plain options). Additionally, they are fixed with tape or adhesive tape. Design flair will allow you to choose the right range of colors. A thin wire will help create the effect of light reflection.

Snowman made of balls

An indispensable attribute of the New Year is a snowman. This can also be made from balloons. Everything is banally simple. Take 3 coolies of different diameters and connect them together with PVA glue. Additionally, you can think through the remaining elements of the character: nose, broom, scarf. The photo shows how beautiful this composition looks.

Table compositions with fresh flowers

Here there is room for imagination to run wild. The decor can be modest or made in a rather large-scale context. The balls act as a base on which the flowers are fixed. You can use other decorative, bright plants.

It is advisable to provide a container on which coolies and flowers will be placed. Then the composition will look more cohesive and harmonious. The balls will act as a kind of support and keep the flowers in balance (if the length of the plants forces you to resort to such measures).

You can decorate not only the New Year's table with such compositions, but also a wedding, corporate party, birthday, or other special event. You can use artificial and fresh flowers. Although, of course, natural plants will look much more impressive.

Hanging compositions

You can attach the balls to anything. The classic option is hanging sacks on chandeliers and cornices. You can provide a structure on the ceiling and decorate the entire room with such products. A composition created from balls of different shapes, sizes, and colors looks more impressive.

But you need to be able to maintain a balance of shades. No products should fall out and vice versa - you cannot highlight any specific coolies too much. Everything should be in moderation, harmonious. Brown-gold, blue+green, black+white go well together.

Such compositions look especially beautiful outdoors. If the weather permits, you should definitely hang the balloons on trees and various structures near which the celebration is planned.

There are plenty of other ideas. In principle, with a little thought, each person can independently come up with some interesting thing. Don’t be afraid to experiment, especially since the cost of materials is quite low.

What is made with your own hands is always appreciated in some special way. Self-made balls of thread will be a wonderful decoration for the New Year, and step-by-step photos will greatly facilitate the process of making them. You can create a real masterpiece while spending a minimum of time and money. What a wonderful gift it would be for a loved one, relative or friend. Creativity, aesthetic appeal, exclusivity - all this will be appreciated. The video below will be an excellent assistant, thanks to which you can quickly make a variety of balls of thread that will undoubtedly decorate any room.

If you have an idea to decorate your home for the holiday, but do not have enough funds for this, then crafts made from thread balls will allow you to do this without causing damage to the family budget. These decorations are very simple to make. Even a child can cope with such work, and the results of his own labor will bring joy to the child. In this article we will learn how to make it at home and use the craft in the interior.

Required materials and tools

Balloons (if you need a small balloon, then finger pads purchased at the pharmacy are perfect for this).
Threads (any you like - for knitting, sewing, embroidery, etc.).
Scissors.
Needle.
or clerical.
Vaseline (if you don’t have it, then any fatty cream and even vegetable oil will do).

Making balls of thread with your own hands: instructions

The very first step is to inflate the balloon to the required size. Tie the end with thread, be sure to leave a longer tail. This is necessary so that there is something to hang the base of our future craft made from thread balls to dry. Then lubricate the ball over the entire surface with cream or Vaseline. If this is not done, the threads will be very difficult to disconnect later. We impregnate the selected threads with glue. By the way, when using multi-colored balls, the weaves will be very beautiful. Using an adhesive plaster or tape, attach the tip of a thread soaked in glue to the balloon and begin to wrap the entire surface of the balloon with arbitrary movements. We do this as if we were winding a ball. The frequency of revolutions depends on the thickness of the thread: if it is thin, the winding density is greater, if it is thick (for knitting), it is less.

During work, you must ensure that the thread is well saturated with glue. You should hold it while winding the balloon without pulling too much.

When the process of winding the threads is completed, leave another long tip and tie it to the tail of the ball. Now comes the turn of drying the future craft made from thread balls. It usually occurs within 24-48 hours. It is necessary for the cocoon to become completely solid. There is no need to hang the workpieces over heating devices to speed up the drying process. The rubber from which the balls are made can burst from hot air, and then all your efforts will be in vain. We recommend hanging them on a clothes dryer, securing them with clothespins. After the glue becomes hard, the balls are removed. How to do this correctly so that the balls of thread you create with your own hands do not lose their shape and what methods of applying glue exist, you will learn by reading the article further.

Options for impregnating threads with glue

If you have to work with PVA glue, then it must be diluted with water in a 1:1 ratio. Pour the glue into a suitable container and soak the threads in it for about 10 minutes. You should avoid getting them tangled.
Wrap the ball with dry thread and then carefully, using a brush or sponge, saturate the workpiece with glue.
Using a hot needle, pierce the tube of glue so that the holes are opposite each other. Thread the thread into the needle and pull it through the resulting holes. This way it will be saturated with glue. If you have glue in a large container, you can pour it into a disposable plastic cup.

How to correctly remove the ball from the workpiece?

We untie the knot of the ball and let it gradually go down, then carefully remove it.
The second method: using a simple pencil with an eraser at the end, peel off the ball from the thread frame and pierce it with a sharp object in several places. We take it out.

Now you know everything about how to make a ball of thread, and you can start decorating our craft. Although in itself it looks original and can become an independent home decoration.

Air fantasies

And the ball will fit perfectly into it and it is very simple to make. Three blanks of white threads, made according to our description, are connected to each other using glue. Glue on the eyes, ready-made or made from paper, and the nose. It can also be made from red threads, only for this we wrap not balls, but paper rolled into a cone. After it dries, remove and cut to the desired length. Sew it on. If you make a loop on the top of the head, then our snowman can be hung, for example, on a Christmas tree, if its size is small.

It turns out that you can make stylish and original Christmas tree decorations yourself without spending huge sums of money on it. New Year's balls made of thread will become an exclusive decor for the forest beauty. Having made small thread balls, we decorate them at our discretion: with beads, various ribbons, sequins, beads, feathers - don’t hold back your imagination, everything you have in the house will come in handy, even the well-known semolina. Yes, yes, if you moisten a ball with glue and dip it in this cereal, you will get a frost effect.

Small tricks

Did you want to make crafts from thread balls, but didn’t have any glue in the house? Don't despair and don't put off your wish for another day! It can be replaced with paste or sugar syrup. The paste is made like this: starch (4 teaspoons) is stirred in a glass of cold water and brought to a boil.

Do you need a red ball, but only white threads? It’s also not scary: we take the paint and repaint it, but this must be done before the ball is deflated and removed from the base.

To give texture to your creation, coat the ball with glue and roll it, for example, in millet or coffee beans.

Good afternoon - today we will make balls from threads... such openwork cobweb balls that can be hung as Christmas tree decorations... or use as LAMP and LAMPSHAD...or you can make cocoons from such thread balls New Year's GARLAND... And such balls of thread can also be even candlesticks or other home decor elements.

You have seen such balls many times... But in THIS ARTICLE... I will show you COMPLEX versions of this technique.

So let's start in order...

First I'll show you WHAT'S POSSIBLE MAKE from such balls…
And then I'll tell you HOW TO DO IT such a ball of thread with your own hands.

What can be done

using BALLS FROM THREAD.

IDEA 1 – New Year's tree.

You can decorate a New Year's table with these balls... if find the frame. THE FRAMEWORK WILL BE splayed tree branch... we wrap such a branch with an LED Christmas tree garland and hang balls of thread on the branches.

IDEA 2 – Table compositions with fresh flowers.

You can wear these openwork spider web balls... TO THE TOP arrange small vases. By the way, the vases can be the same small ones clear (or white) balls(similar, not condoms) into which we take a little water... drop the flower heads into them... and we tie the neck of such a ball to the top of the ball... This is what we see in the photo below.

The result is a composition of balls of thread with flowers, which can be used to decorate a wedding... or a New Year's table

Or you can put these balls in a slide in a flat vase... Pour water onto the bottom of the vase... and push the stems of tall, not heavy flowers (for example, gerberas) THROUGH THE BALLS - the balls will keep the flower stems in balance.

And it’s important - if you are planning such a composition with water... then it’s better to roll up such a ball of thread NOT from simple threads... but from metal ones- that is, made of wire. Because a regular ball of thread will get wet and lose its shape.

IDEA 3 – threads of balloons in HANGING COMPOSITIONS for holiday decoration.

You can attach such balls to a CHANDELIER - just over the dinner ball... and lower them nicely so that the balls are at different heights. And it is better to use balls not of the same color - but of two shades that combine in composition. Red + white, Green + blue, Gold + brown, etc.

Balls of the same thread color also look beautiful... but DIFFERENT SIZES... and DIFFERENT DENSITY thread openwork.

That is, we will need to inflate balls of different sizes... and when we wind our thread, soaked in glue, onto one ball bigger and THICKER... and on the other ball less and less often(so that the holes remain).

Such a white composition is perfect for decorating a wedding - if the wedding is planned in the yard, that is, in nature, then such voluminous balls can be mounted on a tree branch.

IDEA 4 – BALLS made of threads as table and ceiling lamps.

You can make cocoon balls from such thread balls table lamps if you carefully insert a chain of incandescent light bulbs into the balls...

You can make one lamp - with one light bulb socket. In the photo below we see an example of such a lamp made from a spider web ball. Light socket stand made from regular ICE CREAM STICKS.

You can take this chuck holder idea... or you can just buy a ready-made stand with lamp socket at a craft store... or buy a cheap lamp with a shade and remove the shade from it... and somehow decorate the stand so that it doesn’t look like cheap China (for example, cover it with napkins using the decoupage technique... or cover it with a mosaic of glass pebbles).

Balls made of threads - can be used as hanging lamps for ceiling lamp. In the interior, both one lampshade and a whole series of multi-colored lamps look beautiful (reminiscent of a Japanese-style interior).

This is how beautiful a lampshade like this can look in the interior of a room. Bedrooms...children's...hallway.

Light bulb sockets are sold together with a cord... Or you can buy everything separately and install it with the hands of a familiar electrician.

IDEA 5 – New Year’s garland made from an LED chain and balls of thread.

You can also buy the most a regular garland with small LEDs– and make thread balls of different sizes and colors. We insert LEDs into such balls - so that they stick and do not jump out of the balls, it is better to secure them with tape or thread.

Such a garland can consist of airy cocoon balls made of thin wire (as in the photo below). The shine of the wire will additionally reflect and refract the light from the LEDs.

Or the garland can be made of THREAD balls - then the light of such a garland will be calm and softly diffused (as in the photo below).

These are the beautiful sparkling highlights we get on the wall from such a garland.

Can be done ONE LARGE round nito cocoon ball to - and stretch a garland into it in a chaotic manner (so that the light bulbs are evenly distributed over the entire surface of the ball) - we get a beautiful ball-lamp sparkling with several lights at once (left photo below)

Or you can do decorative GARLAND SCREEN from thread balls and shiny glass pendants... (as in the right photo below). The result is a very beautiful and delicate screen-curtain - thanks to the fact that the openwork and airy balls of the screen do not look bulky and the glass beads dilute and decorate the flowing surface of the curtain.

IDEA 6 – SNOWMAN made of balls wrapped in thread.

You can also make a craft with your children to decorate the New Year - a snowman made from balls of thread. You need to make three balls of different sizes (plus you can also make small balls on your hands).

IDEA 6 – CANDLESTICKS made of balls wrapped in thread.

Candle balls needed make it bigger– so that the candle flame is away from the walls and top of the ball. And the ball itself must have LARGE HOLES (i.e. NOT TIGHT winding) - through these holes the heat of the candle will immediately evaporate... and the threads will not heat up.

Candlesticks from threads can be made hanging (pictured below)…

And there may be floor (or table)) – like here in the photo below. The bottom example illustrates what happens if the ball is made larger. Then you can make the cells between the threads smaller. And then, in order to put a candle there, you will need to cut through the web ball with scissors hole on the side... or the hole may be at the bottom(that is, we cut out the bottom... put a candle on the floor and cover it with a ball on top of the part where the hole is in the bottom).

By the way, instead of a candle, you can use a solar-powered garden lantern.

IDEA 7 – balls made of thread for the New Year tree.

These balls are also good to hang on a Christmas tree. It is better to make New Year's balls from small balloons. (that is, you need to buy small balls (these are used to make garlands for weddings) such balls are sold in departments of hypermarkets, where there is a shelf with decorations for children's birthdays.

Also the thread itself immediately after wrapping the ball - while it is still wet and sticky from glue - sprinkle with glitter. You can get glitter for free if you trim the fluffy Christmas tree garland finely.

HOW TO MAKE BALLS FROM THREAD –

three convenient ways.

ESSENCE OF THE WORK to create a ball of thread it looks like this... We wrap a small balloon with thread soaked in glue... And when the glue cocoon of thread dries, we burst the ball, take out its fragments from the cocoon, and get an openwork ball of thread.

Adhesive solutions can be different:

You can dilute WALLPAPER glue (paste based on starch)... or dilute and cook the starch with water yourself.
You can use SILICATE glue (Soviet transparent for paper)
You can use PVA GLUE in its pure form... or in a diluted form - then add water and sugar to it.

And the ways in which the work is done can be different:

METHOD ONE – through the bottle.

For convenience, it is recommended to thread the thread into a needle... use the needle to pierce the bottle with silicone glue through (enlarge it, pick out the hole so that the thread passes freely through the bottle)... This way we get a “mini-device” for wetting the thread with glue without dirtying the table.

METHOD TWO– put a skein of thread in a bowl of glue – as in the left photo below... if you don’t want to spoil the whole ball (because it’s too big) – then you can pass the thread through the bowl of glue by hand (as in the right photo)

WITH WHAT TENSION TO WIND THE THREAD.

The thread on the ball should not be wound very tightly - so that the ball does not get pulled together and is not compressed by the thread. Otherwise we will receive a crooked product.

HOW TO REMOVE THE BALL CORRECTLY.

It is best to dry the glue ball for 2-3 days. So that it hardens properly. If you start removing the ball before it has completely dried, you may end up with a wrinkled product.

Before bursting the ball, you need to make sure that it easily moves away from the walls of the thread cocoon. To do this, you can use the blunt end of a pencil to gently press on the ball THROUGH THE HOLES BETWEEN THE THREADS - in different sides of the ball - push the ball with a pencil so that it comes off everywhere from the walls of the cocoon.

After this, we burst the ball and pull out the burst rag by the tail.

AND ALSO... you can add a cocoon-web LACE.

But this technique can be supplemented with elements knitted applique from the same threads... For example, you can make a piece of a knitted pattern in advance (as in the photo below) ...

To do this, first crochet pattern element(this can be a pattern for any crocheted napkin)… a small element, only the first few rows of the pattern… Glue this lace knitted circle to the surface of the ball. Let's dry...

Then we shave the end of the glue thread - and thread it into a NEEDLE. And with such a thread and needle we begin to carefully (so as not to pierce) wrap the ball, and pick up (as we wind) the edges of the lace applique... and we get a cocoon into which a crocheted lace detail is sewn. Like in the photo below.

Or you can do it differently - IT’S EVEN EASIER TO DO

wrap the ball with threads... dry...

WITHOUT removing the balloon with scissors, cut a round hole (the size of your knitted applique) and apply glue to this head area on the balloon...

soak the knitted applique with glue and attach it to the ball (so that its edges touch the edges of the web). When all this is dry you can remove the ball.

Openwork BALLS made of wire.

Using the same principle, ball-windings are made from wire. You just need to do it carefully so that the end of the wire does not cut into the ball and so that the wire itself does not cut the ball..

Here are some ideas on how to make a ball of thread yourself. As you can see, everything is quick and simple. Even a child can easily master the whole process.

Happy crafting!

Olga Klishevskaya, especially for the site ""
If you like our site, you can support the enthusiasm of those who work for you.
Happy New Year to the author of this article, Olga Klishevskaya.

Useful tips

Snowmen made of threads

You can create very beautiful crafts from ordinary threads.

For the New Year, it is customary to decorate the Christmas tree with various toys. From threads and glue you can make such popular Christmas tree decorations as balls.

In addition, threads and glue can be used to create Christmas trees of different colors and sizes, and to make the picture complete, you can put a snowman near the Christmas tree, which can also be made from threads.

On our website you will also find:

DIY New Year's monkey craft
DIY Christmas balls
How to make a Christmas tree with your own hands

Shiny ball made of thread and PVA glue

You will need:

Several balloons

PVA glue

White thread

Sequins

Small bowl.

1. Pour PVA glue into a bowl and dilute it with a small amount of water.

* If the glue runs out and you are not finished yet, you can add more water.

2. Inflate the balloons. Their size directly affects the size of your future New Year's balls.

3. Prepare a white thread, tie one end to the tail of the ball and start wrapping the thread around the entire ball. Cover the surface of the ball as much as possible.

4. Dip the ball wrapped in thread into a bowl of PVA glue and water and start turning it so that the glue is absorbed into the thread from all sides.

5. Before the glue dries, sprinkle glitter on the ball.

6. So that the ball can dry, you can hang it on a stretched thread using a paper clip or place it on a jar (without a lid).

7. After 24 hours, remove your Christmas decoration and use scissors or another object to burst the ball inside. Carefully pull out the ball; it will be slightly glued to the thread.

* By making several of these shiny balls, you can decorate your Christmas tree or interior. If you get a few branches, you can hang New Year's balls on them, decorating the branches with tinsel.

DIY Christmas balls made of threads

You will need:

Air balloons

Thick threads (for knitting, for example)

PVA glue

Plastic bowl or cup for glue (or other container that you can poke a couple of small holes in)

thick needle

Scissors.

1. Inflate the balloon to the desired size and tie a tail. If you want to make it more round, press it down with your hands.

2. Use a needle and thread to pierce a plastic bowl or cup. This should be done as close to the bottom as possible. You can also simply dip the thread into a container of glue.

3. Pour PVA glue into a container and dilute it with a small amount of water to save glue.

4. Slowly pull the thread through the glue container and begin to wind the ball with it. Since you will be removing the ball after the glue dries, it is better to leave a little space near the tail in advance to pull it out.

5. Once you have wrapped the ball tightly, cut the thread. You can leave a small tail to make a loop and hang the ball on the Christmas tree, for example.

6. Leave the ball to dry. In the natural way it will take 24 hours or a little more. You can speed up the process by placing the ball near the radiator or drying it with a hairdryer.

7. When the glue has completely hardened on all sides, pierce the ball and carefully pull it out.

8. If desired, you can decorate the ball. Try painting it, gluing plastic or paper snowflakes, sequins, or covering it with sparkles.

Another option:

How to make a ball of thread: gift wrapping

You will need:

Large ball of thread

Acrylic paint and brush

PVA glue

Screwdriver

Scissors or utility knife

A long piece of tape.

1. Inflate the balloon and wrap it with thread as tightly as possible. In some places, add a little PVA glue to secure the thread.

* The main thing is to wrap the ball so that nothing is visible through the thread. You can cover all the threads with a thin layer of PVA glue.

2. Using a brush, apply acrylic paint to the thread. You should not skimp on paint, because in addition to color, it also holds the threads together well.

3. Hang the ball to dry overnight. If you have nowhere to hang it, you can put it on the neck of the jar.

4. When the paint has dried, burst the ball and pull it out of the “cocoon”.

5. Cut the resulting cocoon in half using scissors or a stationery knife. To make this easier, wrap the ball with one thread of a contrasting color and start cutting along this line.

6. Using a screwdriver, make several symmetrical holes on both sides of the cocoon.

7. Place gifts wrapped in beautiful paper inside.

8. Pull the ribbon crosswise through the holes and tie it in a bow at the end.

New Year's balls made of threads: foam ball with jute rope

You will need:

Styrofoam ball

Jute rope

PVA glue

Decorations.

1. Wrap a jute rope around a foam ball, attaching it with PVA glue.

2. Decorate the balloon as you like. Use sparkles, stickers, sequins.

You can make a Christmas tree in the same way, only instead of a ball you use a foam cone.

Balls of thread (video)

Option 1.

Option 2.

DIY thread balls (photo)

Christmas tree made of threads. Option 1.

You will need:

Scissors

Regular tape

PVA glue

Decorations.

2. Wrap the cone in cling film or wide tape.

3. Pour PVA glue into a bowl (you can dilute it with a little water).

4. Dip the thread into the bowl of glue and begin wrapping it around the cone, starting from the top of the head. The thread should not be squeezed too hard - there should be enough glue left on it to attach well to the cone.

5. Leave the craft for 24 hours to allow the glue to dry, or you can use a hair dryer to speed up the process.

6. After the glue has dried, carefully remove the thread tree from the cone.

7. You can start decorating your Christmas tree. Any decorations are suitable for this - sparkles, sequins, buttons, beads, pompoms, etc. You can also place an electric candle under the tree to make it look even more beautiful.

DIY thread tree. Option 2.

You will need:

Scissors

Cling film or wide tape

Regular tape

PVA glue

Garland with lights.

1. Make a cone out of paper. Make small cuts at the bottom, leaving 2 cm between them. The cuts are needed so that you can stretch the thread between them.

2. In a bowl, dilute PVA glue with water.

3. Start saturating the thread with glue and wrapping it around the cone, threading the thread through the cuts and wrapping the entire cone. Leave the glue to dry.

4. When everything is dry, carefully remove the string tree from the cone. To make this easier, cut off the edge of the base of the cone (where the cuts are). Start slowly turning the cone until it comes unstuck.

5. Glue, sew or staple the ribbon to the bottom of the tree.

6. Place a garland of lights inside the tree. If the light bulbs are small, then they can be secured inside the tree using thin wire or Christmas tree decorations that have wire fastenings. You can also use paper clips.

Here is another photo instruction:

Beautiful white Christmas tree made of threads. Option 3.

How to make a knitted Christmas tree from threads for the New Year

It might be useful to read: