New Year's wreath made of vines. Christmas wreath made of wicker

You can decorate your home for the New Year and Christmas not only with tinsel, pine needles and toys, but also with original wreaths. There are many options on how to make a Christmas wreath with your own hands. You can prepare a classic wreath from spruce branches or a beautiful one from pine cones, a cool one from paper or an unusual one from paper and orange slices. But if you don’t have any suitable material at hand, we suggest going to the nearest park or garden to collect or cut twigs, twigs, and vines. It is from natural materials that we will make a craft - a Christmas wreath. For needlewomen, the designers of the Zatusim website have prepared several detailed master classes that show how to make a Christmas wreath with your own hands step by step.

Base for a Christmas wreath

Making any Christmas wreath begins with preparing the base. Some people use cardboard, others wire. We invite you to learn how to make a simple base for a Christmas wreath from birch branches with your own hands.

To make it you will need:

Birch branches;
Leg-split;
Scissors

You need to make a Christmas wreath from branches on the same day you collected them. Otherwise, they will begin to dry out and break during operation.

If it is necessary to postpone the work, we bend the rods into a ring and tie them together. Alternatively, they can be soaked in water before work.

We sort birch branches by size and immediately remove excess leaves, side branches, and twigs from them.

We start weaving the base with thick twigs of medium length.

From the selected branches we form a circle. We lay out the blanks so that the thick edge of one branch coincides with the thin edge of the other.

We tie twine to the edge of one rope.

We braid the rope around the first branch.

We tie the thick edge of the second branch.

And we continue to weave the rods until we get a circle.

We ended up with a not entirely even frame, which we will work with. Its flaws will be eliminated in the future, so there is no point in trying to give the frame an ideal shape at this stage.

We attach another branch to the frame and secure it with twine.

We wrap the frame with a long twig.

We continue to weave a wreath from branches, adding new long rods.

When the base becomes dense enough, you can weave the branches without tying them with twine. This will give the impression that the wreath is woven from a single vine.

Now you can level the base, giving it an even shape. You need to work with branches carefully, as they, despite their flexibility, can break.

The finished wreath can be placed under a press overnight.

All that remains is to decorate the base for the Christmas wreath made of twigs. To do this, you can use any available materials: pine needles, ribbons, bows, bells, beads.

Add a few Christmas tree decorations.

Pictures of Christmas wreaths made from branches will tell you how to colorfully decorate the craft.

DIY Christmas wreath made of branches: video

How to make a Christmas wreath from branches more colorful is shown in the video:

Christmas wreath made of grapevine

Original Christmas wreaths are made from grapevines. This material bends more easily, so weaving a wreath will not be difficult. We suggest making a Christmas wreath from vines with your own hands and decorating it with sprigs of laurel and rosemary.

To make a wreath you will need:

Vine;
Laurel sprigs;
Rosemary sprigs;
Fabric tape.

Tools and auxiliary materials:

Wire cutters;
Side cutters;
Wire;
Colored wire.

We twist the base for a Christmas wreath made of wicker.

We attach sprigs of rosemary and laurel to the frame with a thin wire. You can also put the decor on glue. But if you use wire or wire for fastening, the decor can be removed after the holiday, and the base of the wreath can be used for decoration for Easter or the next New Year.

You can complement the decor with twigs with berries.

All that remains is to paint the wreath with a bow. It can be tied with ribbon. Bows made from ribbon with wire inside look original and retain their shape well.

We attach all the elements to the wreath and get this original Christmas or New Year’s decoration.

Video: Christmas wreath made of wicker

How to make Christmas wreaths based on vines is shown in detail in the video:

DIY Christmas wreath made of branches and sticks: master class

You can use not only flexible branches of willow, birch or vine for crafts. You can make an original Christmas or New Year wreath with your own hands from branches and sticks.

To make a colorful wreath you will need:

Sticks 5-8 cm long;
Thick paper or cardboard;
Cones;
Silver ribbon;
New Year's toys.

Auxiliary materials and tools:

Acrylic paints;
Brush;
Glue gun.

We begin to make a Christmas wreath with our own hands step by step from branches cut into sizes of 5 - 8 cm. You will need both straight sticks and curved, forked, with knots.

We paint each branch white with acrylic paint.

Leave the workpieces until completely dry.

The twigs will take about 1 hour to dry.

On a cardboard sheet we draw a circle along which we will lay out the base of the wreath.

We lay out sticks of approximately the same shape and size in a circle.

You should get a neat wooden ring.

Now we lay out the inner circle of a smaller diameter.

We connect the outer sticks and the inner ones with transverse branches.

You can simultaneously place several transverse rods.

To ensure that the structure holds well, we secure the transverse blanks with glue.

We continue gluing the sticks, giving the wreath volume.

At the end we glue the forked and uneven sticks.

We ended up with this original wreath made from sticks and branches.

Let's start decorating the base of the wreath.

Glue snowflakes in a chaotic order.

And pine cones.

All that remains is to attach a colorful bow, which can be made from shiny braid or ribbon.

And decorate the craft with decorative elements.

Snowflakes.

We place a cool toy in the center, which we tie with twine.

An unusual Christmas wreath is ready.

You can use sticks and branches to make unusually shaped Christmas wreaths and other New Year's decorations.

Video: master class of a New Year's wreath made of branches

An unusual weaving of a wreath from sticks and birch branches using a wire frame is shown in the video master class:

New Year's wreaths

Christmas wreath made of wicker

I liked the wreath. Copied from Lena (zanzibar) on the website "For Masters and Craftswomen" Traditional home decoration - Christmas wreath. During winter fairs it can be bought in every store. I’ll show you how you can make such a wreath with your own hands from simple components.

To make it, you only need your personal imagination. All the necessary materials for such a wreath can be purchased in stores that sell a variety of decor. Moreover, it should be noted that wreaths purchased in parts and assembled with your own hands are two to three times cheaper than ready-made ones. So let's get started.

For the wreath, we first need the wreath base itself. You can prepare it yourself in the fall, when the movement of juices in plants stops. Cut vines or willow twigs, roll them into a ring, twist them and then dry them naturally. I bought a ready-made base at the Decor store.

There, in the store, a red ribbon for wrapping gifts caught my eye. For a wreath you will need about two meters.

A few pieces of artificial fir.

Golden stars on a wire base, several decorative red apples and rowan berries, natural pine cones painted red and “Dragon” superglue.

The first step was to cut the tape into two equal pieces of one meter each. I glued one edge of the tape to the vine with the Dragon, pressed it and waited until the glue dried and fixed well. I wrapped it around the wreath in a spiral and secured the other end.

The tape does not have to go from start to finish. Where the tape was not enough, I placed small spruce branches. I cut off 5-7-10 centimeters and glued them tightly too. Then I will place the emphasis of my wreath on them.

The remaining meter of tape was folded three times and rewound tightly in the middle with thread. I straightened its edges and I got a fluffy bow. I glued it in the center of the spruce pieces.

I placed this decor asymmetrically to create the feeling that these small and bright fruits themselves fell from the branches onto my wreath.

Then I decided to add more elegance to the wreath and wrapped the red ribbon in the middle with wire with stars.

In order to be able to hang it above the front door, I came up with a simple mount. I bent a large paper clip along the central fold and hooked one edge onto a vine branch. It turned out to be a large hook on top, I will hook it onto the top of the door.

The wreath is already completely ready.

Lena (zanzibar)

And these wreaths are on the Maternity Leave website

It can be made from different materials. A traditional New Year's wreath is made from fir branches and four candles.

But if you get a little creative, you can make a New Year's wreath out of anything.

As a child, my friends and I made bookmarks from candy wrappers. And then I saw a New Year’s wreath made using the technique of those simple bookmarks.

How to make a New Year's wreath from fleece

You can make a New Year's wreath with your own hands together with the children from the remains of any fabric; fleece is perfect for such work.

The DIY pattern of leaves and decorations for a New Year's wreath is not of very good quality, but the outlines of the leaves are still visible on it. To lengthen the pattern. click on it.

Leaves are made from green fleece of different shades, the veins can be sewn with stitches like this, they are best suited for working on fleece.

You can make the leaves voluminous and double-sided; to do this, you need to cut out 2 leaves, lay thin padding polyester between them, sew along the contour and turn them out. But it’s still easier to work with fleece.

Berries are made from red fleece. For the berries, you need to cut a circle out of red fleece, make stitches in a circle and pull it lightly, fill the resulting depression with cotton wool or padding polyester. Then tighten the thread completely to create a voluminous berry.

DIY New Year's wreath made of satin bows

The photo shows an illustration of making New Year's wreaths from bows and large beads.

A ring for a wreath can be made from thick wire, onto which you can attach anything you like: bows, leaves, berries and pine cones.

An old bicycle inner tube from a tricycle is suitable as a basis for a New Year's wreath; it needs to be wrapped with a satin ribbon and can be secured with threads or glued to decorations.

I wonder if it will be difficult for Santa Claus to order a gazelle on New Year's Eve to transport gifts? After all, you can’t run over deer in cities without snow. And gazelles are almost deer and very roomy

Before guests arrive, everyone cleans up the house and hangs decorations. And among all the garlands, candles and gifts, of course, the Christmas wreath occupies a special place. It can be hung on a door or wall, or placed in the center of the dining table.

In stores on the eve of the holidays you can see a large selection of wreaths of various designs: with ribbons, balls, candles. But to make it truly special and unique, and also cost much less, make it yourself. How to make a Christmas wreath with your own hands? Very simple!

Here you will find 5 step-by-step master classes on making a Christmas wreath. Choose which one you like best: from balls, spruce, pine, pine cones or even mesh.

First, let's look at how to make a traditional Christmas wreath from spruce, which can then be mounted on the front or interior door.

Tools:

straw wreath mold (optional size),
balls (must match the size of the wreath: as the base of the wreath increases, the size of the toys also increases),
decorations in the form of branches with red and zloty beads, a red ribbon for a bow, pine cones (large and small),
spruce branches (thin so that they are easy to bend),
several other branches (for example, pine),
scissors, floral wire (preferably green),
red and gold decorative flowers (three pieces each).

Lay everything out on the table and get to work.

TIP: You can make this form yourself from dry grass and cling film. Additionally wrapped with tape.

Step-by-step production

STEP 1: Making a base from branches

First, make a base of pine branches. Lay them out in the same direction, e.g. counterclock-wise, let the ends of the branches be on the right, and lay the soft tops of the branches to the left side. Attach them to a straw wreath, tie around with floral wire, tie down to the base.
Continue adding more branches around the shape.
Look, are there any empty seats left?, fill in all the gaps with smaller branches.
So far he looks a little disheveled and sloppy. Wrap a little more wire around to tie down any large branches that are sticking out. The wire should be hidden behind the branches. Now you have a uniform, lush wreath - the foundation for further work.

Step 2: Decorate the wreath

Now add a few other branches (in the same direction as the pine ones), distributing them evenly throughout the wreath.
Attach a red bow. You can do without it, then the look will be more festive.
You can add small pine cones if there were none on the branches themselves.
The distribution of colors should be symmetrical(so that it doesn’t turn out that all the red decorations are in one place, otherwise it will look like a red spot). Divide the wreath into 4 parts, one of them has a bow, and the other three add a branch with red beads.

In principle, it already looks good and you can leave it like that, you can finish it.

IDEA: Or hang the wreath in this form first, and after a week add decorations, this way you definitely won’t get tired of the wreath during the holidays

Step 3: Add More Decorations

For contrast, attach several branches with gold beads.
Attach the pine cones: wrap the floral wire around the pine cone close to its base and attach it to the wreath, securing it well in place. Make sure the wire is visible, as less as possible. You can also stop at this point, or continue adding balls.
Attach three balls, taking into account the same conventional division of the wreath into four parts
Add three red and three gold decorative flowers.

You did it! The result is a wonderful Christmas wreath, all that remains is to attach it to the door to delight yourself and your neighbors!

How to make an Advent Wreath

Following the workflow just described, you can also create an Advent Wreath.

According to tradition, there are four candles on it: the first one was lit 4 weeks before Christmas, each subsequent Sunday one more was lit, so it was visible how the holiday was approaching.

Now a wreath of this type can be made with for traditional reasons and for decorative purposes. In any case, it will help create a festive atmosphere.

So, let's get to work:

We create the base of the wreath from the branches, add small pine cones, as in the previous case.
Fasten with hot glue gun candle holders(preferably with sharp pins at the bottom to insert into the wreath between the branches, but ordinary ones will do too), insert candles into them.
We decorate the wreath with large cones and decorative flowers (two each in red and gold).

ATTENTION! Do not leave such a wreath unattended with lit candles!

Master class No. 2: Balloon wreath

To make such a wreath, you most likely won’t even have to go to the store for materials. After all iron clothes hanger and Christmas balls Almost everyone has it. So choose a time to work and get going!

You will need:

1 wire hanger, red Christmas balls (the number depends on the size of the balls you have at home),
pliers, wire cutters (optional),
bow ribbon,
pine or Christmas tree branches (or garland),
wire or strong thread (preferably green).

Step by step execution:

Step 1:

Use pliers to give the hanger a round look. Don't worry if it's not perfectly level, the balls will cover all the unevenness.
Unscrew the hanger, that is, disconnect it at the attachment point under the hook.

Step 2:

Place the balls on the wire. If the end is too sharp or uneven, cut it with pliers. Once all the balls have been strung, bend the hook with pliers to secure the circle.
There is no need to hang the balls on top near the hook, since there will be ribbon and pine branches in this place.

Step 3:

Attach branches to the top of the wreath on both sides of the hook (tie them with wire or thread).
Make a ribbon bow and attach it under the hook.
All is ready! There’s even a hook right away, all you have to do is hang it!

Master class No. 3: Pine cone wreath

A Christmas wreath made of pine cones is very simple to make, but its main advantage is that it is stored for a long time and does not fall off, unlike a spruce wreath. It can be sent for storage until next New Year.

Materials:

Dry cones from 30 or more pieces, depending on the diameter of the wreath
The base for the wreath (if you don’t have one ready like the photo, cut out a torus from thick cardboard)
Glue gun.
Decor at your discretion.

Work order:

Stage 1: Laying the first circle

Using a glue gun, attach the cones to the inside of the Torus or circle.
Inside is best attach smaller cones.
The distance between the cones is 1-2 cm. They should not be attached closer. Maybe even 3-4 cm.

Stage 2:

We do the same thing, but on the outside of the circle with larger cones. Distances between them - 3-4 cm. They should lie freely - not overlap each other.

Stage 3:

And now fill the middle row- he seems to should be on top internal and external row. You can attach the cones not vertically upward, but slightly pointing them in different directions, filling the voids.
We decorate with sprigs of berries or live spruce.

TIP: If you add a garland on top, it will be even more spectacular!

Master class No. 4: From pine branches

“Simple and tasteful” is the most suitable phrase for this method of production. Christmas greenery and minimal decorations. but nevertheless, when you look at the door with such a wreath, it immediately becomes clear that there is a truly festive atmosphere here!

Materials:

wreath mold made of thick wire,
greenery (real or artificial pine branches, other conifers are also suitable),
cones, wire (for tying branches),
glue gun,
small bells,
ribbon for bow.

ATTENTION! When choosing the length of the wire form, keep in mind that after attaching the branches, the wreath will increase several times in size.

Manufacturing stages:

Take a few pine branches and Attach them to the form using wire. First fix the ends of the branches, then wrap them around the wire several times, wrap them with wire. Wrap the entire base in this manner.
Make another ball of twigs on top of the previous one, in the same way. You should get a uniform coniferous wreath.
Attach some pine cones.
Add 3-4 bells golden or silver to create a festive mood. Attach with a glue gun.
Make a ribbon bow and attach it to the wreath.

Every time you open the door, you will hear the quiet ringing of bells and understand that the holiday is in the air around you!

Master class No. 5: Wreath made of decorative mesh

You will definitely surprise all your neighbors with this wreath! This colored hemisphere will not leave anyone indifferent; just looking at it will make you smile and have a sweet anticipation of the holiday!

Materials:

round wire wreath base,
decorative mesh in rolls about 50 cm wide (several colors, compatible with each other),
fluffy decorative wire.

TIP: If you don’t have such a base for a wreath, then you can cut it out of thick cardboard with a torus thickness of -10-15 cm. Then attaching the mesh can be done using a needle and thread or a glue gun.

Manufacturing stages:

Step 1:

Cut off approximately 25-30 cm mesh and roll it into a roll. Squeeze in the center with your fingers. To make it more convenient, you can take someone as an assistant to hold the packages.
You will need a lot of these rolls, they don't have to be exactly the same length.

Step 2:

Group rolls together 4 each, connecting the centers and tying them in this place with fluffy wire. Leave the ends of the wire for attachment to the base.
Tie each such part to the base of the wreath(the remaining ends of the wire). They should be close to each other, leaving no free space.
Continue until the entire space is filled.

Ready! It turned out very colorful and festive! If desired, you can hang a toy on the wreath so that it is in the center. But be careful not to overdo it, so that it doesn’t turn out to be “too much”, because everywhere you need to know when to stop.

Wreath ideas

Finally, I would like to point out that here are some ideas for making wreaths. And, in fact, there are a lot of them! After all, it’s worth replacing a small part, making your own amendment, and you’ll get a new unique copy! Turn on your imagination and create! Involve the whole family in this process to make the process even more interesting and enjoyable!

Merry Christmas!!!

Designer wreaths 2019

In 2019, vertical wreaths are coming into fashion; they are mounted not on the wall, but on the ceiling, like a pendant. The principle of assembling the wreath is the same as described above. BUT

You can place candles on top of them.
Add hanging elements

There is no limit to fantasy. The main thing is that there is somewhere to hang it on the ceiling! If your chandelier is not very good, then you can just place it under it.

Any holiday, especially New Year and Christmas, requires careful preparation. This is not only about buying gifts for family and friends, a festive feast and a Christmas tree with a bright garland. It is necessary to create a festive atmosphere in your home and . And for this we begin to decorate our home from the very threshold. Today we will make a New Year's wreath with our own hands. And we will definitely attach what we get to the front door. And then decide for yourself, outside or inside!

First you need to think about which materials Your New Year's wreath will be made. Believe me, the choice can be quite wide. Namely:

a traditional wreath made of thuja or conifer branches with the addition of various decorations
from natural cones
from New Year's toys
from tinsel
organza
made of artificial materials imitating the branches of coniferous trees
from feathers!

This article will discuss options for making a festive wreath from all of the above materials.

You need to start making a festive wreath from natural branches of coniferous plants by preparing all the necessary materials and tools. A tools you will need simple ones:

scissors
wire cutters
glue gun and glue sticks

Materials you may need:

branches of thuja or coniferous tree - spruce, pine, cedar
wreath base
strong and not too thin threads or twine
thin, flexible wire
glue "Moment Crystal"
Christmas decorations
serpentine and tinsel
gift paper and gift bows
organza
feather boa

Making a wreath is impossible without a base on which it will be attached. Therefore, first of all we choose her in order to form a New Year's wreath. Read on to find out which base to choose for your craft.

When the basis for the New Year's wreath has already been chosen, we begin to make the wreath itself. To do this, take one or two small branches of thuja or ephedra and tie them tightly to the base. We secure the thread so that it does not unwind. Next, we sequentially apply the following branches and secure them again. And so we move over the entire surface of the base until it is completely covered with branches and you get a wreath.

The size of the wreath directly depends on the size of the base. For a wreath made from natural branches of coniferous trees, choose a solid base, as the weight of the wreath is impressive.

Such wreaths made from natural materials can be decorated with cones and clusters of autumn berries: viburnum, black and red rowan. Of course, such a wreath will not last long: the berries will wither and wrinkle, and the needles will begin to fall off. Therefore, if you want your New Year’s wreath to be more durable, replace natural ingredients with artificial ones.

Artificial elements often look no worse than natural ones.

How to make a wreath from pine or cedar branches, watch this video.

Needless to say, now everything can be bought in stores. But a wreath made by yourself will still be better, even if, due to inexperience, you make it a little “disheveled.” Handwork in such things is always highly appreciated.

Of course, you often want to decorate a New Year’s wreath with everyone at once. But you shouldn't be too zealous. There must be moderation in everything. Choose something from your existing home:

small Christmas toys
small “gifts” made of foil
bumps
bows
ribbons
artificial flowers
nuts
candies and so on...

Decorating a wreath with pine cones is a simple, affordable and, perhaps, correct option. If you took natural branches for the wreath, then pine cones and matting are what you need for decoration.

Natural pine cones also make very beautiful Christmas wreaths. To make them you will need mainly pine cones. But spruce and smaller alder trees will not be superfluous.

Watch the master class in this video and you can easily make a wreath of pine cones with your own hands.

If you don’t have the time or desire to make the wreath voluminous and large, make a simple version - stick the pine cones in one row on a cardboard hoop, add some decorations. You will get a very nice wreath.

In my opinion, of course, the most beautiful New Year's wreaths are made from pine cones with the addition of berry branches.

If you want something unusual, spray paint the fir branches and cones in the color you like. For example, in blue.

Silver color has always been the embodiment of crisp snow in the cold, fresh air and winter holidays. Nothing changed! Everything goes on!

Another video on this topic.

A wreath of coniferous or thuja branches can decorate not only a door or wall, but also a chandelier!

In addition to a New Year's wreath from pine cones or branches, you can quickly make a wreath from organza and Christmas tree balls. To do this, take the organza to which you will tie and simply tie large bows around it. Organza is a fairly stiff material and holds its shape well. Bright balls can be glued or tied to the base of the wreath.

Imagine and come up with a look his New Year's wreath. Decorate it with something unusual, like pretty feathers!

If you do not use natural materials in an organza wreath, then the wreath can decorate your home for a long time.

Doesn’t this “Santa Claus” cheer you up?

Elegant and yet impressive looking feather wreaths. To make them, they use ready-made feather scarves (also called boas) and Christmas tree balls.

New Year's feather wreaths are something romantic and at the same time delightful. Suitable for dreamy and pure natures.

All this is good when you can buy what you need in stores for the holidays. But it’s another matter when you want to do something similar (and maybe even better) with your own hands. When preparing for the holidays, a pre-holiday mood settles in the house, creating that same atmosphere of home where you want to return. If you feel a craving for creativity during the New Year's Eve, do not suppress this impulse within yourself, but give yourself the opportunity to translate this desire into something significant. For example, do it yourself New Year's wreath made of Christmas tree toys .

You can probably imagine how many different compositions can be assembled from Christmas tree balls! But it can also be a wreath made from a variety of toys that you have at home. Or you can collect only cold (or warm) shades for your craft.

To make a wreath from Christmas tree decorations, you can use any kind and stick balls or icicles on it. Or you can string as many toys on a strong wire as will fit on it. To make the wreath more voluminous, glue the remaining balls with hot glue.

Tinsel wreath can be made quite quickly. We wrap a foam or cardboard base with tinsel and decorate it with a Christmas poinsettia flower. Add figures and beads that you can find at home.

A tinsel wreath does not require a strong and reliable frame. A simple cardboard hoop will be enough.

Use the advice of those who have already made New Year's wreaths with their own hands.

It might be useful to read: